|
The Journal of the Australian Ceramic Society is published twice annually and issued free to Society members.
The Journal of the Australian Ceramic Society was first published in 1965 and contains original research works and reviews. All papers are peer reviewed.
Perennial problems - sustainable solutions ceramic 'fixes' for industrial waste
R. Branson |
Abstract |
The crystallization behaviour and machinability of sodium-potassium mica and fluorapatite containing glass ceramics
C. Cekli and G. Goller |
Abstract |
Effect of crack growth resistance upon fracture of ceramic/polymer graded interfaces
M. Hoffman, C. Deneke and L. Kidson |
Abstract |
Precision cast sialon0bonded silicon carbide for molten metal refractory applications
G.V. White, C.M. Sheppard, M. Bowden, M. Ryan, G.C. Barris, M. Copper and C. Yu Chen |
Abstract |
Sol-gel synthesis of tunnel structure materials and their photocatalytic performance on redox reactions in aqueous solutions
L.M. Torres-Martinez, L.L. Garza-Tovar, I. Juerez-Ramerez and A.C. Lopez |
Abstract |
Diamond grain size effects on grinding-ability of diching blades for cutting AlTiC (Al2O3-TiC composite)
T. Adachi, K. Matsumaru and K. Ishizaki |
Abstract |
Conversion of coral sand to calcium phosphate for biomedical applications
J. Chou, B. Ben-Nissan, A.H. Choi, R. Wuhrer and D. Green |
Abstract |
Defect chemistry of titanium dioxide effect of interfaces
T. Bak, J. Nowotny, M.K. Nowotny and L.R. Sheppard |
Abstract |
Preparation of tin oxide
H. Taib and C.C. Sorrell |
Abstract |
Time-resolved neutron diffraction studies of new methods for Mn+1AXn phase synthesis
E.H. Kisi and D.P. Riley |
Abstract |
Structural and design aspects of porous and permeable block pavement
S. Beecham and B. Myers |
Abstract |
Strength development in autoclaved aluminosilicate rich industrial wastecement systems containing reactive magnesia
B. Liu, A.S. Ray and P.S. Thomas |
Abstract |
Editors
A/Prof. B. Ben-Nissan
Department of Chemistry, Materials and Forensic Science, University of Technology Sydney, Australia
Dr. W. R. Vance
Institute of Materials Engineering, Australian Nuclear Science and Technology Organisation
Guest Editor
Dr A. H. Choi
Department of Chemistry, Materials and Forensic Science, University of Technology Sydney, Australia
Associate Editors
Prof. Tadashi kokubo
Department of Material Chemistry. Kyoto University, Japan
Prof. Wolfgang H. Muller
Techniche Universitat Berlin, Germany
Prof. Giuseppe Pezzotti
Department of Materials Kyoto Institute of Technology, Japan
Prof. Akiyoshi Osaka
Department of Bioscience and Bioengineering Okayama University, Japan
Dr Gregory L. Heness
Department of Chemistry, Materials and Forensic Science, University of Technology Sydney, Australia
Prof. Michael V. Swain
Division of Biomaterials, University of Sydney, Australia
Dr Dan Perera
Institute of materials engineering, Australian Nuclear Science and Technology Organisation
Copyright
No part of this publication may be reproduced, displayed, stored in a retrieval system, or transmitted in any form or by any means of electronic, optical, magnetic tape or devices, photocopying, recording or otherwise, without the permission in writing from the Australian Ceramic Society Federal Secretary.
|
