|
The Journal of the Australian Ceramic Society is published twice annually and issued free to Society members.
The Journal of the Australian Ceramic Society was first published in 1965 and contains original research works and reviews. All papers are peer reviewed.
Application of Secondary Ion Mass Spectrometry in Studies of Niobium Segregation in Niobium-Doped Titanium Dioxide
L.R. Sheppard, A.J. Atanacio, T. Bak, J. Nowotny, and K.E. Prince |
Abstract |
Nano-Mechanical Properties of Hydroxyapatite Coatings with a Focus on the Single Solidified Droplet
K.A. Gross and S. Saber-Samandari |
Abstract |
A New Solid State Synthesis Methodology for Ternary and Higher Order Compounds
D. P. Riley, and E.H. Kisi |
Abstract |
Quantitative Assessment of Stress Fields in Ceramic and Semiconductor Materials in the Scanning Electron Mircoscope
Giuseppe Pezzotti, Alessandro Alan Porporati, Andrea Leto and Wenliang Zhu |
Abstract |
Material Characteristics That Have the Greatest Influence on the Survival of Refractory Anchorage Systems
Paul Plater, Graham Quigley |
Abstract |
TiO2Thick Films by Anodic Oxidation
H.Z. Abdullah, and C.C. Sorrell |
Abstract |
Comparative assessment of medium-term properties and performance of fly ash and metakaolin Geopolymer systems
T.J. Brown, K.K. Sagoe-Crentsil, A.H. Taylor
|
Abstract |
Spark Plasma Sintering of X-Sialon
G. C. Barris, Z. Shen and M. Nygren |
Abstract |
Management of Materials Research: Protection and Commercialisation of Nanotechnology
Michelle Hedges,Partner |
Abstract |
La0.9Sr0.1Ga0.57Mn0.43O3 Anode Ceramics of Solid Oxide Fuel Cells Produced Using Reaction-Sintering Process
Yi-Cheng Liou, Pei-Hung Yeh, Ming-Jih Lin |
Abstract |
Autoclaved Lime-Colloidal Silica Slurries and Formation of Al-Tobermorite
H. Connan, A.S. Ray and P.S. Thomas |
Abstract |
A Critique of the Design Strength of Glass In AS 1288 and Determination of a Rationally Deduced Value
Leon Jacob and Nathan Munz |
Abstract |
A Data-Constrained Computational Model for Morphology Structures
Y. S. Yang, A. Tulloh, I. Cole, S. Furman and A.Hughes |
Abstract |
Toward the Development of High Performance, Frequency Agile, RF/Microwave Dielectric Ceramics Based on Nanoscale Structural Analysis
Y. Liu, R.L. Withers, B.Nguyen and X.Y. Wei |
Abstract |
An Indirect Implicit Model For Frequency Dependent Hystereses of Piezoelectric Ceramics
H. Man, T. Furukawa, M. Hoffman, S. Imlao and Z. H. Lou |
Abstract |
Radioisotope Tracing of Knee Implant Wear
Laura G. Gladkis , Luiza Haberska, Jennie Scarvell, Paul Smith, Heiko Timmers |
Abstract |
Editors
A/Prof. B. Ben-Nissan
Department of Chemistry, Materials and Forensic Science, University of Technology Sydney, Australia
Dr. W. R. Vance
Institute of Materials Engineering, Australian Nuclear Science and Technology Organisation
Guest Editor
Dr A. H. Choi
Department of Chemistry, Materials and Forensic Science, University of Technology Sydney, Australia
Associate Editors
Prof. Tadashi kokubo
Department of Material Chemistry. Kyoto University, Japan
Prof. Wolfgang H. Muller
Techniche Universitat Berlin, Germany
Prof. Giuseppe Pezzotti
Department of Materials Kyoto Institute of Technology, Japan
Prof. Akiyoshi Osaka
Department of Bioscience and Bioengineering Okayama University, Japan
Dr Gregory L. Heness
Department of Chemistry, Materials and Forensic Science, University of Technology Sydney, Australia
Prof. Michael V. Swain
Division of Biomaterials, University of Sydney, Australia
Dr Dan Perera
Institute of materials engineering, Australian Nuclear Science and Technology Organisation
Copyright
No part of this publication may be reproduced, displayed, stored in a retrieval system, or transmitted in any form or by any means of electronic, optical, magnetic tape or devices, photocopying, recording or otherwise, without the permission in writing from the Australian Ceramic Society Federal Secretary.
|
