Journal of the Australian Ceramics Society
Volume 44, Number 1, 2008

ISSN 0004-881X

The Journal of the Australian Ceramic Society is published twice annually and issued free to Society members.

The Journal of the Australian Ceramic Society was first published in 1965 and contains original research works and reviews. All papers are peer reviewed.

Adsorption of Lysozyme and Trypsin by Modified MCM-41 with Post-Synthesis Hydrothermal Treatment and Hydrophobic Functionalisatione
Jing Yang, Geoffrey W. Stevens, Andrea J. O'Connor
Abstract
Pitchstone Fines Pozzolanic Activity Assessment As Partial Portland Cement (PC) Replacements
K. Vessalas, A.S. Ray, P.S. Thomas, R. Sri Ravindrarajah, P. Joyce, J. Haggman
Abstract
A Technique For Introducing Precrack By Utilizing Frictional Forces on Glass CT Specimens and Fracture Toughness Values of Glass
A. Hashimoto, Y. Yamashita
Abstract
Synthesis of Ca3Co4O9 and CuAlO2 Ceramics of the Thermoelectric Application Using A Reaction- Sintering Process
Y. C. Liou, W. C. Tsai, W. Y. Lin, U. R. Lee
Abstract
A Preliminary Research On The Properties of Lightweight Expanded Clay Aggregate
O. Arioz, K. Kilinci, B. Karasu, G. Kaya, G. Arslan, M. Tuncan, A. Tuncan, M. Korkut, S. Kivrak
Abstract
A New Erosion Protection Machining Method for Sintered NdFeB Permanent Magnet
Li Li, Rongguo Gou, Guangming Yuan
Abstract
Preparation of Zinc- Doped Lanthanum Strontium Gallate Solid Electrolyte Using a Reaction-Sintering Process
Y. C. Liou, C. C. Lan, S. L. Yang
Abstract
The Effect of Al2O3 and SiO2 On Setting and Hardening of Na2O-Al2O3-SiO2-H2O Geopolymer Systems
P. De Silva, K. Sagoe-Crenstil
Abstract
Effect of Mechanical Milling on the Sintering Behaviour of Alumina
J.S. Forrester, H.J. Goodshaw, E.H. Kisi, G.J. Suaning, J.S. Zobec
Abstract
Positron Annihilation Lifetime Spectroscopy of Off-Stoichiometric and Doped Gd2Ti2O7
E.R. Vance, J.H. Hadley, Jr., F.H. Hsu
Abstract
In-Situ Synthesis of Magnetic Mn-Zn Ferrite Ceramic Object by Solid State Reaction
Emad M. M. Ewais, Mahmoud M. Hessien, Abdel-Hady A. El-Geassy
Abstract

Editors

Prof. B. Ben-Nissan
Department of Physics and Advanced Materials, University of Technology Sydney, Australia

Dr. E. R. Vance
Division of Materials, Australian Nuclear Science and Technology Organisation

Dr O. Standard
Department of School of Materials Science and Engineering University of New South Wales

Assistant Editor

Joshua Chou
Department of Physics and Advanced Materials, University of Technology Sydney, Australia

Editorial Board

Prof. Tadashi kokubo
Research Institute for Science and Technology Chubu University Japan

Prof. Wolfgang H. Muller
Techniche Universitat Berlin, Germany

Prof. Giuseppe Pezzotti
Department of Materials Kyoto Institute of Technology, Japan

Prof. Akiyoshi Osaka
Department of Bioscience and Bioengineering Okayama University, Japan

Dr Gregory L. Heness
Department of Physics and Advanced Materials, University of Technology Sydney, Australia

Prof. Michael V. Swain
Division of Biomaterials, University of Sydney, Australia

Dr Dan Perera
Division of Materials, Australian Nuclear Science and Technology Organisation

Prof. Christopher. Berndt
IRIS, Faculty of Engineering and Industrial Sciences Swinburne University of Technology Victoria Australia

A/Prof. S. Kunar
Division of Materials, Australian Nuclear Science and Technology Organisation

Prof. Chris Sorrell
Department of School of Materials Science and Engineering University of New South Wales

Mr. David Cassidy
Division of Materials, Australian Nuclear Science and Technology Organisation

A/Prof. Sunil Kunar
Ian Wark Research Institute University of South Australia

Mr. Gerry Triani
Division of Materials, Australian Nuclear Science and Technology Organisation

Prof. Mark Hoffman
Department of School of Materials Science and Engineering University of New South Wales

Copyright

No part of this publication may be reproduced, displayed, stored in a retrieval system, or transmitted in any form or by any means of electronic, optical, magnetic tape or devices, photocopying, recording or otherwise, without the permission in writing from the Australian Ceramic Society Federal Secretary.

Our Corporate Members: