|
The Journal of the Australian Ceramic Society is published twice annually and issued free to Society members.
The Journal of the Australian Ceramic Society was first published in 1965 and contains original research works and reviews. All papers are peer reviewed.
Synthesis of Micro-Spherical Porous Hydroxyapatite Particles by Wet Method
Ayu Kodaira, Toru Nonami, Hiroko Hase |
Abstract |
Preparation of Apatite Microsphere with Nano-Size Pores on the Surface via Salt-Assisted Ultrasonic Spray-Pyrolysis Technique and its Drug Release Behavior
Y. Kawanobe, M. Honda, T. Konishi, M. Mizumoto, Y. Habuto, N. Kanzawa, T. Uchino and M. Aizawa |
Abstract |
Restoration and Conservation of Dental Enamel using a Flexible Apatite Sheet
S. Hontsu, K. Yoshikawa, N. Kato, Y. Kawakami, T. Hayami, H. Nishikawa, M. Kusunoki and K. Yamamoto |
Abstract |
Fundamental Study on Relation between Elution of Calcium from System CaO-MgO-SiO2
Hiroko Hase, Toru Nonami, Shou Yamamoto, Norihisa Kawamura |
Abstract |
Changes of Material Properties of Inorganic/Organic Hybrids Fabricated by Infiltration of Poly(L-Lactic Acid) Into Open Pores of Porous Hydroxyapatite Ceramics in a Simulated Body Fluid
T. Yoshimi, N. Sugiyama, Y. Takeoka, M. Rikukawa, K. Oribe and M. Aizawa |
Abstract |
Sintering Effects on Physico Chemical Properties of Bioactivity of Natural and Synthetic Hydroxyapatite
F.Z. Mezahi, H. Oudadesse, A. Harabi , Y. le Gal and G. Cathelineau |
Abstract |
Preparation of Granules of Calcium Deficient Hydroxyapatite Composed of Rod-Shaped Particles and Evaluation of their Potential for Drug Carrier
Masanobu Kamitakahara, Kiyoko Sato, Ryosuke Fujii, Ryohei Imai and Koji Ioku |
Abstract |
Nano-Structured Apatite Granules as Drug Delivery Device for Bone Infection Treatments
S. Hesaraki, A. Zamanian, M. Khorami |
Abstract |
Cell Proliferation, Morphology and Differentiation of Transgenic-Cloned Pig Calvarial Osteoblasts on the Silicon-Substituted Hydorxyapatite Ceramics Fabricated via Ultrasonic Spray-Pyrolysis Technique
M. Honda, K. Kikushima, T. Konishi, M. Mizumoto, H. Matsunari, H. Nagashima, M. Aizawa |
Abstract |
A New Synthesis Route of Nano Mullite By Calcining Pulp Precursors
Rifki Septawendar, Bambang Sunendar Purwasasmita, and Leanddas Nurdiwijayanto |
Abstract |
Investigation of Properties and Corrosion Behavior of Hard TiAlN and AlCrN PVD Thin Coatings in the 3 wt% NaCl Solution
Vikas Chawla, Amita Chawla , Y. Mehta, D. Puri, S. Prakash and Buta Singh Sidhu |
Abstract |
Development and Clinical Studies of HA Coated Dental Implants using Various Techniques
Hideki Aoki and Tuantuan Li |
Abstract |
Novel composites using hydrogel and BCP granules: Preclinical studies
G. Daculsi, AP. Uzel, E. Goyenvalle, E. Aguado, P. Pilet, F. Moreau, P. Borget, S. Baroth
|
Abstract |
Observation of Interaction between Living Bone and Micro Implant with Titanium Thin Film
Akira Watazu, Hirofumi Kido, Kensuke Beppu, Kay Teraoka, Kenzo Morinaga, Kae Kakura, Tsutomu Sonoda and Naobumi Saito |
Abstract |
Editors
Prof. B. Ben-Nissan
University of Technology Sydney, Australia
Dr. E. R. Vance
Australian Nuclear Science and Technology Organisation
Dr O. Standard
University of New South Wales
Dr. D. W. Green
University of Queensland, Australia
Assistant Editor
Joshua Chou
University of Technology Sydney, Australia
Dr. Andy Choi
University of Technology Sydney, Australia
Editorial Board
Prof. Tadashi kokubo
Chubu University, Japan
Prof. Wolfgang H. Muller
Techniche Universitat Berlin, Germany
Prof. Giuseppe Pezzotti
Kyoto Institute of Technology, Japan
Prof. Akiyoshi Osaka
Okayama University, Japan
Prof. Michael V. Swain
University of Sydney, Australia
A/Prof. Gutekin Goller
Istanbul Technical University, Turkey
Prof. Razi Vago
University of Nrgev Beer Sheva, Israel
Prof. Mark Hoffman
University of New South Wales, Australia
Prof. Christopher. Berndt
Swinburne University of Technology, Australia
Prof. Sunil Kunar
University of South Austraila
Dr Gregory L. Heness
University of Technology Sydney, Australia
Dr. Paul Thomas
University of Technology Sydney, Australia
Copyright
No part of this publication may be reproduced, displayed, stored in a retrieval system, or transmitted in any form or by any means of electronic, optical, magnetic tape or devices, photocopying, recording or otherwise, without the permission in writing from the Australian Ceramic Society Federal Secretary.
|
